EU projekti

Bilateralni projekti:

The use of agro waste anthocyanins with nanocellulose as indicators for pH-controlled smart packaging
Vrsta projekta: bilateralni projekt sa Slovenijom
Voditelj projekta sa hrvatske strane: prof. dr. sc. Sanja Mahović Poljaček, Sveučilište u Zagrebu Grafički fakultet
Voditelj projekta sa slovenske strane: dr. sc. Igor Karlovits,  Inštitut za celulozo in papir, Ljubljana
Trajanje projekta: 1.4.2023. – 31.3.2025. 

Povećanje efikasnosti izrade i eksploatacije tiskovnih formi za ofsetni tisak, GRF, BILAT  – (Hrvatska-Slovenija) (2016-2017)
CRO partner: doc. dr. sc. Tomislav Cigula

Multilateralni projekti:

COST Action FP 1405, Active and intelligent fibre-based packaging – innovation and market introduction, GRF, COST
CRO partners: doc. dr. sc. Sonja Jamnicki, prof. dr. sc. Branka Lozo

In Public, In Particular financiran od strane Izvršne agencije za edukaciju, audiovizuale i kulturu u natječaju “Creative Europe – Culture Sub-programme (2014-2020) – ‘Support to European cooperation projects – Smaller scale cooperation projects projects’ – Call for proposals EACEA 32/2014 – Budget 2015.“ CRO partners: prof. dr. sc. Jesenka Pibernik, prof. dr. sc. Diana Milčić, Ivana Žganjar

Project: In Public, In Particular

Izv. prof. dr. sc. Jesenka Pibernik

http://www.d-a-z.hr/hr/vijesti/in-public-in-particular,4221.html

In Public, In Particular (IPIP) aims to develop and promote participatory art methods and situation specific art among European audiences. The main tools to reach these aims are audience research, public workshops and international street happenings which are carried through by artists and art students in close cooperation with street actors and the public of four European streets.
Each partner has chosen a specific street in their city and will focus on the people, services, history and phenomena of those streets. Small enterprises, public offices, libraries and NGOs located by the selected streets are invited to cooperative workshops in order to plan, implement and estimate situation specific artworks with the artists and art students. This way they provide special knowledge about the streets and contribute to the content of the artworks whilst they also learn about artistic processes and practices and the beneficial possibilities of art.
During IPIP the participating artists and art students are provided with multiprofessional workshop periods. Special attention is given to applying inspiring digital marketing methods to promote situation specific art and participatory art for general public and international audiences. Audiences outside the project areas are invited and encouraged to participate in the project activities through social media.
The IPIP project is co-funded by the Creative Europe programme of the European Union.

Creative Europe (from the CE web site)

The Creative Europe programme aims to support the European audiovisual, cultural and creative sector.
The different funding schemes encourage the audiovisual, cultural and creative players to operate across Europe, to reach new audiences and to develop the skills needed in the digital age. By helping European cultural and audiovisual works to reach audiences in other countries, the programme will also contribute to safeguarding cultural and linguistic diversity.
The Culture sub-programme of the CE helps cultural and creative organisations to operate transnationally and promotes the cross-border circulation of works of culture and the mobility of cultural players. It provides financial support to projects with a European dimension aiming to share cultural content across borders.

Project: Quality insurance of processless printing plates

Izv.prof. dr. sc. Sanja Mahović Poljaček

http://projects.unizg.hr/projekti?@=5wm7#proj_10647

Type (Programme): BILAT
Organisation Name: Hochschule der Medien, Fakultät Druck und Medien, Stuttgart
Organisation country: Germany
Contact person name: Thomas Hoffmann-Walbeck
Project status: From: 2014-01-01 To: 2015-12-31 (Execution)

Offset processless printing plates have been introduced to the market a few years ago. They are called processless because their processing phase differs from the others, and is based on the usage of wetting solution, instead of the developer solution that has an adverse impact on the ecological environment. Despite the fact that this technology is significantly more favourable than the most environmentally friendly offset printing plates, application thereof has not yet been accepted in the industry. The reason for this is the inability to control the quality of the processless printing plates and the lack of standards which ensure the processing phase of those printing plates. Two main goals have been defined: 1. Development of laboratory methods for evaluating the quality processless printing plates; 2. Research of wetting solution that will be used for processing phase of processless printing plates in offset printing machines.

Project: Impact of renewable materials in packaging for sustainability – development of renewable fibre and bio-based materials for new packaging applications

Prof. dr. sc. Branka Lozo

http://projects.unizg.hr/projekti?@=5ttw#proj_10647
Type (Programme): MULTILAT
Project funding: –
Organisation Name: Innventia AB
Organisation adress: –
Organisation country: Sweden
Contact person name: Kennert JOHANSSON
Project status: From: 2010-10-20 To: 2014-12-08 (Execution)

Description:  Paper and board are made from renewable resources and are low carbon footprint materials, therefore giving them an environmental advantage compared to other materials. However, in packaging applications, paper and board are nearly always used in combination with non renewable materials; e.g. barrier materials derived from oil based plastics or aluminium. To give the forest industry a competitive edge this Action will focus on packaging solutions based entirely on renewable resources in order to remove the serious disadvantages associated with future paper and board packaging solutions that continue to rely on non renewable materials. The Action will explore possibilities that the forest itself can offer as a raw material base for different components within a given package, thus exploring the full potential of the fibres. The Action is an opportunity and a strategic objective for the forest sector value chain and will reduce environmental impact thus making it of potentially great importance for contributing to European policy. To fully understand the benefits it is important to assess the solutions from a sustainability point-of-view taking account of the total packaging value chain. That is why the Action also addresses research in e.g. value chain efficiency, end-of-life and supply of raw material.

Project: New possibilities for print media and packaging – combining print with digital

Prof. dr. sc. Branka Lozo

http://projects.unizg.hr/projekti?@=5ug4#proj_10647
Type (Programme): MULTILAT
Organisation Name: Anu Seisto
Organisation country: Finland
Project status: From: 2012-01-16 To: 2015-11-30 (Execution)

Description:  The goal of this Action is to promote discussion on the benefits that may be achieved from novel combinations of print and digital. It will also be used to enhance innovations that will make use of the benefits of both print and electronic media as well as innovations where print and electronic media are combined. Several examples exist where successful combinations have been achieved e.g. through the use of image recognition, augmented reality or printed electronics to bring interactivity into fiber based products. To give the forest industry a competitive edge this Action will focus on new innovations by combining knowledge of the end users with most recent technological achievements. New models of ongoing change in social interaction and in the cultural products of paper and electronic media will be elaborated and proposed. The results will promote critical and theoretical discussion on the changing meanings of contemporary media culture. The Action will explore new business opportunities for the fiber based products and the value chains of print media and packaging through novel, innovative uses. It will also serve as a channel for communication between industry and academia, thus contributing to the development of new commercial applications.

Project: European Network on Quality of Experience in Multimedia Systems and Services

Izv.prof. dr. sc. Jesenka Pibernik

http://projects.unizg.hr/projekti?@=5upi#proj_10647

Type (Programme): COST
Project status:  From: 2010-11-08 To: 2014-11-07 (Execution)

The Network of Excellence (NoE) Qualinet aims at extending the notion of network-centric Quality of Service (QoS) in multimedia systems, by relying on the concept of Quality of Experience (QoE). The main scientific objective is the development of methodologies for subjective and objective quality metrics taking into account current and new trends in multimedia communication systems as witnessed by the appearance of new types of content and interactions. A substantial scientific impact on fragmented efforts carried out in this field will be achieved by coordinating the research of European experts under the catalytic COST umbrella.

Archive

Project: New graphic applications with chromogenic printing inks

Prof. dr. sc. Branka Lozo

http://projects.unizg.hr/projekti?@=5ttw#proj_10647

Type (Programme): BILAT
Project funding: – International partner
Organisation Name: Kemijski inštitut
Organisation adress: Hajdrihova 19, 1000 Ljubljana
Organisation country: Slovenija
Contact person name: Doc. dr. sc. Marta Klanjšek Gunde
Project status: From:2010-03-15 To: 2011-12-31

Project: Treatments of Fiber-based Materials for Improved Food Packaging

Prof. dr. sc. Branka Lozo
http://projects.unizg.hr/projekti?@=5ug6#proj_10647
Type (Programme): BILAT
Organisation Name: TU Dresden
Organisation country: Germany
Contact person name: Prof. Harald Grossmann
Project status: From: 2012-01-02 To: 2013-12-31

Description:  Znanstveni ciljevi projekta se odnose na definiranje postupaka i metoda za kvalitativno poboljšanje prehrambene ambalaže proizvedene od vlaknatih materijala, a u smislu zdravstvene ispravnosti i sigurnosti ambalažiranih prehrambenih namirnica. Ambalažni materijali za prehrambene namirnice moraju ispuniti visoke zahtjeve zdravstvene ispravnosti samih namirnica. Potencijalni kontaminanti iz ambalaže koji predstavljaju opasnost narušavanja zdravlja konzumenata ili koji mogu utjecati na promjenu organoleptičkih svojstva namirnica, ne smiju doći u kontakt s namirnicom niti u nju migrirati. Štetni kontaminanti mogu primjerice migrirati iz tiskarskih boja i lakova koji se tiskaju na površinu prehrambene ambalaže ili se mogu nalaziti u strukturi samog ambalažnog materijala iz prethodnih ciklusa, te u slučaju direktnog ili čak indirektnog kontakta s prehrambenom namirnicom, mogu je kontaminirati.
Short description of the task performed by Croatian partner: Planirani zadaci za znanstvenu grupu s GRF su karakterizacija proizvedenih uzoraka, ispitivanje efikasnosti provedenih deinking flotacija, kovencionalnih i modificiranih, te dijagnosticiranje i kvalificiranje ostvarenih poboljšanja. Težište ispitivanja hrvatskih znanstvenika je ispitivanje zdravstvene ispravnosti definirano proizvedenih vlaknatih materijala: određivanje prisutnosti kontaminanata teških metala, pentaklorofeonola, formaldehida, aromatskih amina, diizopropilnaftalena, ftalata i poliklorin bifenila, fluorescentnih bjelila, te provođenje mikrobioloških testova za detektiranje antimikrobnih konstituenata. Nanošenje mikrobarijernih slojeva za sprječavanje migracije kontaminanata u prehrambene namirnice će se također dijelom provoditi na GRF. Ispitivanja takvih kompozitnih materijala zahtijevat će dodatno usavršavanje postupaka ispitivanja zdravstvene ispravnosti budući da prema preporučenim kriterijima svi slojevi, tj. svaki pojedinačni sloj kompozitnog ambalažnog materijala mora bit zdravstveno ispravan.  Prilikom posjete njemačkih znanstvenika provodit će se edukacija i posjeta suradničkim institucijama u Hrvatskoj kao i obrada podataka prikladnim metodama.

Project: Communication and Education / struktura i razvoj novih modela obrazovanja u visokoškolskim ustavima

Project status: From: 2002-08-22 To: 2007-10-01 (Completed)
Type (Programme): BILAT
Organisation Name: Univerza v Mariboru – Institut za nove medije i nove tehnologije za obrazovanje na daljinu (INMITI)
Organisation country: Slovenia
Organisation name: Grafički fakultet
Contact person name: Mario Plenković
Contact person e-mail: mplenkovic@yahoo.com
Short description of project: Projekt je postavljen u cilju uspostave novih Curicculuma za e-learning (obrazovanje na daljinu). U tom smislu istraživači su postavili osnovnu metodologiju za izradu novih obrazovnih curicculuma za obrazovanje na daljinu.

Project:  Characterisation of Paper Surfaces for improved Printing Paper Grades

Project status: From: 2003-10-01 To: 2007-10-01 (Completed)
Contract number:
Action line:
Type (Programme): MULTILAT
Instrument: COST
Project cost: –
Project funding: –
Project coordinator
Organisation Name: NTNU/PFI
Organisation adress: E. C. Dahls gate 2
Organisation country: Norway
Contact person name: Sissel Ravnsborg
Contact person email:  Email
Croatian partner
Organisation name: Grafički fakultet
Organisation address: Getaldićeva 2 10000 Zagreb
Contact person name:  Lozo, Branka
Contact person e-mail:  branka.lozo@grf.hr
Partners
TU Graz Austria
UCTM Bulgaria
Faculty of Graphic Arts University of Zagreb Croatia
KCL     Finland
CTP     France
TU Dresden, PTS Germany
Budapest Tech Hungary
SSCCPC  Italy
Veenstra Netherlands
NTNU/PFI Norway
TU Lodz  Poland
University of Coimbra  Portugal
TU Iasi Romania
PPI Slovenia
Holmen Paper  Spain
STFI Sweden
Imerys  United Kingdom

Short description of project: The main objective of the action is to develop and improve methods for analysis of printing paper surfaces in order to improve print quality. Further, it is of interest to develop methods that can measure ink distribution on printed surfaces and correlate this to the local topography and chemistry.

Project: Improvements in the understanding and use of de-inking technology

Project status: From: 2004-09-01 To: 2008-09-01 (Completed)
Contract number:
Action line:
Type (Programme): MULTILAT
Instrument: COST
Project cost: –
Project funding: –
Project coordinator
Organisation Name:  CTP
Organisation adress: Cedex 9 Grenoble
Organisation country: France
Contact person name: Gerard Galland
Contact person email: ggalland@laposte.net
Croatian partner
Organisation name: Grafički fakultet
Organisation address: Getaldićeva 2 10000 Zagreb
Contact person name: Lozo, Branka
Contact person tel: 38512371080
Contact person fax: 38512371077
Contact person e-mail: branka.lozo@grf.hr
Partners
Organisation name    Country
Faculty of Graphic Arts University of Zagreb Croatia
Abo Akademi Finland
CTP France
INGEDE Germany
SSCCP Italy
KCPK Netherlands
TU Lodz Poland
TU Iasi Romania
PPI Slovenia
University of Girona Spain
YKI Sweden
PIRA United Kingdom
Short description of project

Project: The Limits of Paper Recycling

Project status: From: 2005-03-01 To: 2009-03-01 (Completed)
Contract number:
Action line:
Type (Programme): MULTILAT
Instrument:     COST
Project cost: –
Project funding: –
Project coordinator
Organisation Name: KCL
Organisation adress:
Organisation country: Finland
Contact person name: Jan-Erik Levlin
Contact person email:  jan-erik.levlin@iki.fi
Croatian partner
Organisation name: Grafički fakultet
Organisation address: Getaldićeva 2 10000 Zagreb
Contact person name: Lozo, Branka
Contact person e-mail: branka.lozo@grf.hr
Partners
Organisation name Country
PPI Bulgaria
Faculty of Graphic Arts, University of Zagreb Croatia
TU Brno Czech Republic
KCL, VTT  Finland
CTP  France
TU Dresden, INGEDE Germany
Thessaloniki University Greece
PRI Hungary
SSCCP Italy
Latvian Institute of Wood Chemistry  Latvia
KCPK  Netherlands
TU Lodz Poland
CEPROHART  Romania
University of Ljubljana Slovenia
University Complutense de Madrid Spain
STFI Sweden
FRC  United Kingdom

Short description of project: The main objective of the Action is to develop scenarios describing the future use of recovered paper within the European paper industry in order to provide a better background for focused research activities in the field as well as to facilitate investment decisions or future company strategies concerning raw material markets. The benefits of the action will be a sound base for targeted research, provision of necessary arguments in the discussion with governmental organizations, guidelines for the design of recycle-friendly paper products, guidelines for more effective, tailor-made collection strategies for used paper and a background for investment decisions

Project: Society and Technology-Media and Communication

Project status: From: 2005-06-15 To: 2008-12-30 (Completed)
Type (Programme): BILAT
Project funding:  –
International partner
Organisation Name:
Organisation adress:
Organisation country: Poland
Croatian partner
Organisation name:  Grafički fakultet
Organisation address:
Contact person name: Plenković Mario
Short description of project

Project: Deinking mechanisam, new formulation of the graphic materials and waste water

Project status: From: 2007-01-01 To: 2008-12-31 (Completed)
Type (Programme): BILAT
Project funding: –
International partner
Organisation Name:
Organisation adress:
Organisation country: Slovenia
Croatian partner
Organisation name: Grafički fakultet
Organisation address:
Contact person name: Bolanča, Zdenka
Short description of the task performed by Croatian partner

Project: Interkulturalni aspekti u (incoming) turizmu novih članica EU i njihova implemtacija u obrazovne kurikulume

Project status: From: 2008-02-01 To: 2010-02-01 (Completed)
Contract number:
Action line:
Type (Programme): MULTILAT
Instrument:
Project cost: –
Project funding:  –
Project coordinator
Organisation Name:
Croatian partner
Organisation name: Grafički fakultet
Organisation address:
Contact person name: Plenković Mario
Short description of the task performed by Croatian partner

Project: Elektrokemijska ispitivanja, i korozijska otpornost aluminija i njegovih oksida i primjena na tiskovnoj formi za plošni tisak

Project status: From: 2010-03-15 To: 2011-12-31 (Completed)
Type (Programme): BILAT
Project funding: –
International partner
Organisation Name:  Laboratorij za Fizikalno kemijo in Kemijsko termodinamiko, Fakulteta za Kemijo in Kemijsko tehnologijo, Maribor
Organisation adress: Smetanova ulica 17
Organisation country: Slovenia
Contact person name: Dr.sc. Regina Fuchs-Godec, doc
Contact person email: fuchs@uni-mb.si
Croatian partner
Organisation name: Grafički fakultet
Organisation address: 10000 Zagreb, Getaldićeva 2
Contact person name: Dr. sc. Miroslav Gojo, red. prof
Contact person e-mail: mgojo@grf.hr

Short description of project: Tijekom procesa plošnog tiska, tiskovna forma načinjena od aluminija, nalazi se u stalnom kontaktu s otopinom za vlaženje i bojilom. Nedvojbeno je da se u takvim sustavima stvaraju galvanski članci, budući da su u kontaktu materijali različitog elektrodnog potencijala.Takvi uvjeti procesa tiska mogu uzrokovati koroziona oštećenja same tiskovne forme što u konačnici može uzrokovati smanjenje kakvoće otiska, a time i konačnog produkta. Istraživanja u okviru ovog projekta obuhvatila bi koroziona ispitivanja i utvrđivanje mehanizma korozije i kinetike korozije pri čemu će se koristiti suvremene elektrokemijske metode: ciklička voltametrija, impedancijska spektroskopija. Za snimanje površina koristi će se SEM i EDS metoda, te fraktalna analiza. Za polarizacijska mjerenja koristit će se klasični trielektrodni sustav i Tacusselova polatizacijska ćelija. Za potenciodinamička mjerenja i za mjerenja impedancije koristit će se Solatron 1287 Electrochemical Interface, te 1250 Frequency response analyzer. Obada dobivenih rezultata vršit će se programskom opremom Scribner Associates INC. (CorrWare, CorrView, Z-View i Z-Pot)

Project: New graphic applications with chromogenic printing inks

Project status: From: 2010-03-15 To: 2011-12-31 (Completed)
Type (Programme): BILAT
Project funding:  –
International partner
Organisation Name: Kemijski inštitut
Organisation adress: Hajdrihova 19, 1000 Ljubljana
Organisation country: Slovenija
Contact person name: Doc. dr. sc. Marta Klanjšek Gunde
Contact person email: marta.k.gunde@ki.si
Croatian partner
Organisation name: Grafički fakultet
Organisation address: Getaldićeva 2, 10000 Zagreb
Contact person name: Doc. dr. sc. Branka Lozo
Contact person e-mail: branka.lozo@grf.hr
Short description of the task performed by Croatian partner